Account: Password: Register Forget?

Product Center

Acid and Alkali Concentration Analyzer location:Home > PRODUCTS > Water Analysis > Online > Acid and Alkali Concentration Analyzer

HK-368U Acid/ Alkaline Analyzer Supplies category:Acid and Alkali Concentration Analyzer
Material code:HK-368U
Manufacturer:HKY Technology Co.,Ltd.

Introduction

Applications

. Power
. Chem or Petrochemical
. Pulp and Paper
. Food and Beverage
. Metallurgy

Feature

. Transmitter integrated with sensor 
. Variable frequency exciting power and resonance circuit
---largely enhance voltage output of transformer, improve accuracy, sensitivity and stability
. Unique grab sample by signal 
. Non-electrode measurement 
---prevent electrodes from corrosion, plug and polarizing
. Flow type sensor adopts low temperature magnetic structure and ferromagnetic shielding
---anti-interference, zero drift free 
. MCU and special interface integrated circuit
---fully digital sample grab, calculation and display 
. High accurate temperature compensation
---real time concentration display and long distance transmission
. Plastic sealed enclosure
---normal operation even in harsh industrial environment

Technique Data

Display 

LED 

Measurement

HCl, NaOH, NaCl, H2SO4 (please specify before ordering )

Measurement Range

NaOH: (0~5.00)%

H2SO4: (0~5.00)%

HCl: (0~10.00)%

NaCl: (0~5.00)%; (0~10.00)%

For other measurements, please consult with factory

Accuracy

±5% F.S

Output

(4~20)mA DC

Ambient 

(0~40.0) oC, relative temperature ≤85% Non-corrosive gas locations 

Power Supply

indicator :AC187V~242V 50HZ

transmitter:24VDC (power supplied by Indicator )

Mounting 

indicator : panel

transmitter: wall-mounting 

Overall Dimension (mm)

indicator : 160(W) × 80(H) × 260(D)

transmitter: 230(W) × 140(H) × 100(D)

Net Weight

indicator : 1.0 Kg

transmitter: 1.3Kg

Pressure

≤0.25Mpa (factory test pressure 0.4MPa)

Sample Flow

(100~1000)ml/min

Temperature Sensor

LM334 (298.15μA/25oC)

Sample Grab Connection

M10×1, plastic soft tubing (OD 6mm, ID 4mm)

Temperature Compensation

(0~55.0) oC

Relay Contact Output Capacity 

220V AC 1A non inductive load, normal open 

Configure